• Bantam E-Station BC8DX Dual output, 200 + 200W
Bantam E-Station BC8DX Dual output, 200 + 200W

Charge current: 9.0A x 2 output,
Discharge current: 5.0A x 2output, 1~22 NiCd/NiMH x 2 output, 1~8 LiIo/LiPo/LiFe x 2 (16 cells), with new Program kit (EAC300)
Dual Ports can charge packs up to 8 cells of Li-poly, Li-fe or Li-ion on each port.
Operating voltage: DC 10~18 volts
Charge/discharge power: max. 200/25W per port.


Operating input voltage DC 11~18 V
Idling current approx. 100mA
Charge/discharge power max. 200/25W per output
NiCd/MH 1~22 cells per output
LiIo/LiPo/LiFe 1~8 cells per output
Pb 2~ 28V per output
Charge current 0.1 to 9.0A
Discharge current 0.1 to 5.0A
No. of cycles up to 10 times, N/A for Lixx
Battery data memories up to 5 data per battery-type
Battery capacity range 100 ~ 65000mAh
Delta-peak sensitivity zero, 5 ~ 20mV adjustable
Trickle charge current off, 50 ~ 300mA adjustable
Current drain in balancer 200mA/cell
Weight 1100g
Dimension 200 x 150 x 55 mm

User's setting-up parameters

Lithium battery type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
Lithium battery charge mode Normal, Balance, Storage, Fast
NiCd/NiMH charge mode Normal, Linear, Reflex
NiCd Delta-peak voltage
sensitivity disable, delicate, 5 to 20mV adjustable
NiMH Delta-peak voltage
sensitivity disable, delicate, 5 to 20mV adjustable
Pb battery charge mode Linear, Pulse
Battery temperature cut-off Off, 20 to 80C
Waste time between
charge/discharge cycle zero to 60 minutes
Trickle charge mode Off, 50 ~ 300mA adjustable
Integral timer limit for safety Off, 10 to 1380 minutes
Maximum charging capacity
limit for safety 50 ~ 120%
Key beep and buzzer sound ON/OFF, melody selectable
Input power low alert 10 to 11V
LCD back-light brightness Off, 1 ~ 8

- Operating software
The operating program in this charger is executed with mutual links and communications with every components to prevent any possible
error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit
your requirement. And BC8DX has a large LCD for showing various informations including charge/discharge graphs during the process.

- High-power dual output circuit
BC8DX employs the circuit that features two totally independent but identical high-power outputs which are powered as much as 160watts
each. As a result, it can charge or discharge up to 44 cells of NiCd/NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the
twin-fan cooling system is so efficient that can hold such a power without any trouble of running the circuit.

- Dual Individual voltage balancer for Lithium batteries
BC8DX has individual cell voltage balancers at both outputs. So it does not need any balancer separately when charging Lithium batteries
(LiIo/LiPo/LiFe) for voltage balancing.

- Balance individual cells on discharge
BC8DX also can monitor and balance individual cells of the Lithium battery pack during the discharge process as well as ‘FAST’ and
‘STORAGE’ mode. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery
BC8DX can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can
select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

- Maximum safety
Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid
from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the
limit the process will be terminated automatically when you set the maximum value.
Temperature limit : The temperature of the battery on charging or discharging will be raised by its internal chemical reaction. If you set the
limit of temperature the process will be expired forcibly when the limit has been reached.
Processing time limit : You can also restrain the maximum processing time to prevent any possible defect.

- Cyclic charging/discharging
Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

- PC based analysis using USB communication

For technical expert, BC8DX offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph
of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.
This program can run on both outputs with single USB link to PC.

Write a review

Note: HTML is not translated!
    Bad           Good

Bantam E-Station BC8DX Dual output, 200 + 200W

  • Product Code: VEBANBC8DX
  • Availability: 1
  • 275.00€

  • Ex Tax: 229.17€